旧水泥混凝土路面冲击碾压技术初探

文章结合G206国道宿州至怀远段旧水泥混凝土路面改造施工实例,介绍了冲击碾压施工的原理、特点、质量控制措施及安全文明施工注意事项,并分析了冲击碾压施工中存在的问题与对策,为类似工程的改造施工提供参考。     

三维地面模型测量技术在水运工程中的应用

码头、航道等水运工程的三维设计、BIM设计需要更精细的、直观的、全覆盖的三维地面模型。利用多波束测深技术、无人机航测技术和三维激光扫描技术采集高精度的测量点云数据,基于AutoCAD、Civil 3D等软件平台,建立高精度、直观的三维地面模型的技术方案,结合工程实例进行论证分析。结果表明,从陆域到水域再到局部重点建构筑物三维测量内外业技术解决方案合理、效果显著,能较好地满足三维设计、BIM设计等要求,具有较高的应用和参考价值。     

疏浚硬质黏性土制作室内试验研究

基于疏浚工程中硬质黏性土挖掘困难和生产效率低的问题,为原状土进行刀齿的切削试验,需要制备硬质黏性土土质。针对疏浚吹填淤泥含水率大和压缩性强等特征,开发了一套底部抽真空的"真空+堆载"制备技术。试验研究表明:1)制备装置效果良好,制备土质标准贯入击数达到13击,液性指数达到0.36,疏浚岩土工程特性级别为4级,性质接近疏浚工程中给施工带来困难的黏性土质,为硬质黏性土的切削试验提供了合格的模型土质。2)制备土质含水率W与无侧限抗压强度R、标准贯入击数N、土体承载力F存在较好的相关性,回归系数均在0.72以上,为流塑等状态的软弱淤泥处理处置研究提供基础技术支撑。     

Statistical assessment of EV usage potential from user’s perspective considering rapid-charging technology

The aim of the German Government is the licensing of one million electric vehicles (EV) in Germany until 2020. However, the number of battery electric vehicles (EVs) today still is just above 25,000. There are several reasons for deciding against an EV, but especially low battery ranges as well as too long perceived charging duration inhibit the usage of an EV. To eliminate the negative influence of these two reasons on the decision to purchase an EV, a novel charging technology is established. The rapid-charging technology enables the user to recharge the battery to 80% of its state of charge (SOC) within 20–30 min. For the examination of the technology’s impact from (potential) user’s perspective, users and nonusers of battery electric vehicles were questioned about the perceived additional value of public rapid-charging infrastructure by taking into account different trip purposes and running comparisons to regular charging options. The results show an increased perceived value especially for trips with leisure purpose, considering their share of all trip purposes in Germany, according to the MiD 2008. In order to increase the number of licensed EVs in Germany, the study’s results also suggest further dissemination of information on rapid charging which might influence the perceived usefulness of the technology and consequentially the perceived usefulness of an EV.     

信息技术市场拓展方法研究

科学技术的发展遵循一定的轨迹,也会为信息技术市场带来必然的改变.面对众多的市场机会和激烈的竞争环境,需要通过科学有效的方法找准市场规律,以新的视角开拓差异化市场,使企业进入可持续发展的良性循环中.本文通过分析3种技术发展趋势,展开讨论了新市场的切入方法,并分享3个典型技术市场案例供读者思考.     

Adoption of alternative fuel vehicles: Influence from neighbors,family and coworkers

During the last years, many governments have set targets for increasing the share of biofuels in the transportation sector. Understanding consumer behavior is essential in designing policies that efficiently increase the uptake of cleaner technologies. In this paper we analyze adopters and non-adopters of alternative fuel vehicles (AFVs). We use diffusion of innovation theory and the established notion that the social system and interpersonal influence play important roles in adoption. Based on a nationwide database of car owners we analyze interpersonal influence on adoption from three social domains: neighbors, family and coworkers. The results point primarily at a neighbor effect in that AFV adoption is more likely if neighbors also have adopted. The results also point at significant effects of interpersonal influence from coworkers and family members but these effects weaken or disappear when income, education level, marriage, age, gender and green party votes are controlled for. The results extend the diffusion of innovation and AFV literature with empirical support for interpersonal influence based on objective data where response bias is not a factor. Implications for further research, environmental and transport policy, and practitioners are discussed.     

近岸深水联排灌注桩施工工艺优化

采用传统的冲孔灌注桩施工工艺进行海上灌注桩施工时,往往会面临适用条件限制、环境污染、施工成本增加等问题。针对三亚凤凰岛项目海上冲孔灌注桩施工特点,介绍通过优化钢平台结构形式及布局设计、泥浆循环系统优化设计、结构稳定性计算、"四新设备"创新应用等措施,有效降低施工成本、提高施工效率、减少环境污染、提高施工质量。结果表明采取的工艺优化和平台改进措施效果良好、实用性强。     

振冲法加固砂土地基工艺选择及施工参数控制

根据砂土的黏粒含量,振冲法可采用不加填料的振冲密实法或有填料的振冲置换法,选择合适的振冲施工工艺和确定合理的工艺参数,与地基加固效果和地基处理的工程投资密切相关。在振冲器的振动荷载作用下,由于饱和砂土的液化产生振密作用,根据孔隙水压力的增长模型,推导了饱和砂土的临界液化时间,并分析留振时间的影响因素。结合两个工程实例,探讨了振冲密实法和振冲置换法两种工艺的适应性及加固效果。根据砂土的类型和黏粒含量,将砂土地基分为3类,不同的砂土地基采用合适的振冲工艺,并得出施工参数的合理区间。     

科研院所科技创新工作简析

本文立足于国内科研院所科技创新现状,指出了科研院所科技创新的特点,阐述了科研院所科技创新的内涵,论述了科研院所科技创新的问题,提出了科研院所科技创新的方法。     

帷幕注浆在岩溶发育区桩基施工中的应用

文章结合帷幕注浆技术在贵阳绕城公路西南段大河边特大桥大规模溶洞施工处理中的应用实例,提出了岩溶地区帷幕注浆的设计方案与施工技术要点,对同类施工具有借鉴和指导作用。